HWD 300
| TRAILER (3 AXLE) | |
| 1) Dimensions | |
| Length | : 8.500 mm |
| Width | : 2.550 mm |
| Height | : 1.000 mm |
| 2) Chassis thickness | : 300 mm |
| MAST | |
| Mast load capacity | : 25 ton |
| Mast pipes thickness | : 3" from |
| Mast dimensions | |
| - Length | : 11 metres |
| - Rear width | : 1.40 metres |
| - Mast Top Rollers | : 32 cm 9 Piece |
| - Height | : 1.15 metres |
| Must height above ground | : 14.00 15.00 metres |
| ROTARY TRAY | |
| 1) Rotary table dimensions | |
| Inner diameter | : 200 mm |
| Middle diameter | : 600 mm |
| Outer diameter | : 900 mm |
| 2) Rotary table ground clearance | : 160 cm 220 cm (max.) |
| 3) Upper and lower felt settings of the rotery table | : Adjusted for air system |
| 4) Rotary load capacity | : 50 ton |
| 5) Top motor rotation speed | : 330 revolution per minute |
| 6) Rotary rotation speeds | : 25 revolution per minute (1. gear) |
| : 35 revolution per minute (2. gear) | |
| : 60 revolution per minute (3. gear) | |
| : 90 revolution per minute (4. gear) | |
| : 125 revolution per minute (5. gear) | |
| : 155 revolution per minute (6. gear) | |
| : 20 revolution per minute (reverse gear) | |
| WATER HEAD | |
| 1) Water head capacity | : 30 ton |
| Inner diameter of water head pipe | : 3" (7,62 ) |
| Water head | : Steel |
| PUMP SYSTEM | |
| 1) Centrifugal Pump | : 1 (SP3) |
| Diameter of the water suction line of the centrifugal pump | : 4" (10,16 cm) |
| Discharge line diameter of Centrifugal Pump | : 3" (7,62 ) |
| Centrifugal Pump drain pipe outlet diameter | : 1,5" ( 3,81 ) |
| Drain hose length | : 10 metre |
| Accessories | : 1 piece 4" (10,16 cm) throttle |
| : 6 m long 4" (10,16 cm) water drain hose | |
| 2) Pressure hoses | : 3" (7.62") diameter dublex wire - metal press |
| MAST HEAD AND ROPE SYSTEM | |
| Mast head pulley diameter | : 32 cm |
| Total pulley | : 7 piece |
| Rope diameter | : 18 mm ( 6×36) |
| Total rope length | : 250 metre. |